PHP WORLD - Free PHP Help , Resources and Scripts Consulting

Server variables: `$_SERVER`

Note: Introduced in 4.1.0. In earlier versions, use $HTTP_SERVER_VARS.

$_SERVER is an array containing information such as headers, paths, and script locations. The entries in this array are created by the webserver. There is no guarantee that every webserver will provide any of these; servers may omit some, or provide others not listed here. That said, a large number of these variables are accounted for in the CGI 1.1 specification, so you should be able to expect those.

This is a 'superglobal', or automatic global, variable. This simply means that it is available in all scopes throughout a script. You don't need to do a global $_SERVER; to access it within functions or methods, as you do with $HTTP_SERVER_VARS.

$HTTP_SERVER_VARS contains the same initial information, but is not an autoglobal. (Note that $HTTP_SERVER_VARS and $_SERVER are different variables and that PHP handles them as such)

If the register_globals directive is set, then these variables will also be made available in the global scope of the script; i.e., separate from the $_SERVER and $HTTP_SERVER_VARS arrays. For related information, see the security chapter titled Using Register Globals. These individual globals are not autoglobals.

You may or may not find any of the following elements in $_SERVER. Note that few, if any, of these will be available (or indeed have any meaning) if running PHP on the command line.

'PHP_SELF'

The filename of the currently executing script, relative to the document root. For instance, $_SERVER['PHP_SELF'] in a script at the address http://example.com/test.php/foo.bar would be /test.php/foo.bar.

If PHP is running as a command-line processor, this variable is not available.

'argv'

Array of arguments passed to the script. When the script is run on the command line, this gives C-style access to the command line parameters. When called via the GET method, this will contain the query string.

'argc'

Contains the number of command line parameters passed to the script (if run on the command line).

'GATEWAY_INTERFACE'

What revision of the CGI specification the server is using; i.e. 'CGI/1.1'.

'SERVER_NAME'

The name of the server host under which the current script is executing. If the script is running on a virtual host, this will be the value defined for that virtual host.

'SERVER_SOFTWARE'

Server identification string, given in the headers when responding to requests.

'SERVER_PROTOCOL'

Name and revision of the information protocol via which the page was requested; i.e. 'HTTP/1.0';

'REQUEST_METHOD'

Which request method was used to access the page; i.e. 'GET', 'HEAD', 'POST', 'PUT'.

'QUERY_STRING'

The query string, if any, via which the page was accessed.

'DOCUMENT_ROOT'

The document root directory under which the current script is executing, as defined in the server's configuration file.

'HTTP_ACCEPT'

Contents of the Accept: header from the current request, if there is one.

'HTTP_ACCEPT_CHARSET'

Contents of the Accept-Charset: header from the current request, if there is one. Example: 'iso-8859-1,*,utf-8'.

'HTTP_ACCEPT_ENCODING'

Contents of the Accept-Encoding: header from the current request, if there is one. Example: 'gzip'.

'HTTP_ACCEPT_LANGUAGE'

Contents of the Accept-Language: header from the current request, if there is one. Example: 'en'.

'HTTP_CONNECTION'

Contents of the Connection: header from the current request, if there is one. Example: 'Keep-Alive'.

'HTTP_HOST'

Contents of the Host: header from the current request, if there is one.

'HTTP_REFERER'

The address of the page (if any) which referred the user agent to the current page. This is set by the user agent. Not all user agents will set this, and some provide the ability to modify HTTP_REFERER as a feature. In short, it cannot really be trusted.

'HTTP_USER_AGENT'

Contents of the User_Agent: header from the current request, if there is one. This is a string denoting the user agent being which is accessing the page. A typical example is: Mozilla/4.5 [en] (X11; U; Linux 2.2.9 i586). Among other things, you can use this value with get_browser() to tailor your page's output to the capabilities of the user agent.

'REMOTE_ADDR'

The IP address from which the user is viewing the current page.

'REMOTE_HOST'

The Host name from which the user is viewing the current page. The reverse dns lookup is based off the REMOTE_ADDR of the user.

Note: Your web server must be configured to create this variable. For example in Apache you'll need HostnameLookups On inside httpd.conf for it to exist. See also gethostbyaddr().

'REMOTE_PORT'

The port being used on the user's machine to communicate with the web server.

'SCRIPT_FILENAME'

The absolute pathname of the currently executing script.

'SERVER_ADMIN'

The value given to the SERVER_ADMIN (for Apache) directive in the web server configuration file. If the script is running on a virtual host, this will be the value defined for that virtual host.

'SERVER_PORT'

The port on the server machine being used by the web server for communication. For default setups, this will be '80'; using SSL, for instance, will change this to whatever your defined secure HTTP port is.

'SERVER_SIGNATURE'

String containing the server version and virtual host name which are added to server-generated pages, if enabled.

'PATH_TRANSLATED'

Filesystem- (not document root-) based path to the current script, after the server has done any virtual-to-real mapping.

'SCRIPT_NAME'

Contains the current script's path. This is useful for pages which need to point to themselves.

'REQUEST_URI'

The URI which was given in order to access this page; for instance, '/index.html'.

'PHP_AUTH_USER'

When running under Apache as module doing HTTP authentication this variable is set to the username provided by the user.

'PHP_AUTH_PW'

When running under Apache as module doing HTTP authentication this variable is set to the password provided by the user.

'AUTH_TYPE'

When running under Apache as module doing HTTP authenticated this variable is set to the authentication type.

Environment variables: `$_ENV`

Note: Introduced in 4.1.0. In earlier versions, use $HTTP_ENV_VARS.

These variables are imported into PHP's global namespace from the environment under which the PHP parser is running. Many are provided by the shell under which PHP is running and different systems are likely running different kinds of shells, a definitive list is impossible. Please see your shell's documentation for a list of defined environment variables.

Other environment variables include the CGI variables, placed there regardless of whether PHP is running as a server module or CGI processor.

This is a 'superglobal', or automatic global, variable. This simply means that it is available in all scopes throughout a script. You don't need to do a global $_ENV; to access it within functions or methods, as you do with $HTTP_ENV_VARS.

$HTTP_ENV_VARS contains the same initial information, but is not an autoglobal. (Note that HTTP_ENV_VARS and $_ENV are different variables and that PHP handles them as such)

If the register_globals directive is set, then these variables will also be made available in the global scope of the script; i.e., separate from the $_ENV and $HTTP_ENV_VARS arrays. For related information, see the security chapter titled Using Register Globals. These individual globals are not autoglobals.

HTTP Cookies: `$_COOKIE`

Note: Introduced in 4.1.0. In earlier versions, use $HTTP_COOKIE_VARS.

An associative array of variables passed to the current script via HTTP cookies. Automatically global in any scope.

This is a 'superglobal', or automatic global, variable. This simply means that it is available in all scopes throughout a script. You don't need to do a global $_COOKIE; to access it within functions or methods, as you do with $HTTP_COOKIE_VARS.

$HTTP_COOKIE_VARS contains the same initial information, but is not an autoglobal. (Note that HTTP_COOKIE_VARS and $_COOKIE are different variables and that PHP handles them as such)

If the register_globals directive is set, then these variables will also be made available in the global scope of the script; i.e., separate from the $_COOKIE and $HTTP_COOKIE_VARS arrays. For related information, see the security chapter titled Using Register Globals. These individual globals are not autoglobals.

HTTP GET variables: `$_GET`

Note: Introduced in 4.1.0. In earlier versions, use $HTTP_GET_VARS.

An associative array of variables passed to the current script via the HTTP GET method. Automatically global in any scope.

This is a 'superglobal', or automatic global, variable. This simply means that it is available in all scopes throughout a script. You don't need to do a global $_GET; to access it within functions or methods, as you do with $HTTP_GET_VARS.

$HTTP_GET_VARS contains the same initial information, but is not an autoglobal. (Note that HTTP_GET_VARS and $_GET are different variables and that PHP handles them as such)

If the register_globals directive is set, then these variables will also be made available in the global scope of the script; i.e., separate from the $_GET and $HTTP_GET_VARS arrays. For related information, see the security chapter titled Using Register Globals. These individual globals are not autoglobals.

HTTP POST variables: `$_POST`

Note: Introduced in 4.1.0. In earlier versions, use $HTTP_POST_VARS.

An associative array of variables passed to the current script via the HTTP POST method. Automatically global in any scope.

This is a 'superglobal', or automatic global, variable. This simply means that it is available in all scopes throughout a script. You don't need to do a global $_POST; to access it within functions or methods, as you do with $HTTP_POST_VARS.

$HTTP_POST_VARS contains the same initial information, but is not an autoglobal. (Note that HTTP_POST_VARS and $_POST are different variables and that PHP handles them as such)

If the register_globals directive is set, then these variables will also be made available in the global scope of the script; i.e., separate from the $_POST and $HTTP_POST_VARS arrays. For related information, see the security chapter titled Using Register Globals. These individual globals are not autoglobals.

HTTP File upload variables: `$_FILES`

Note: Introduced in 4.1.0. In earlier versions, use $HTTP_POST_FILES.

An associative array of items uploaded to the current script via the HTTP POST method. Automatically global in any scope.

This is a 'superglobal', or automatic global, variable. This simply means that it is available in all scopes throughout a script. You don't need to do a global $_FILES; to access it within functions or methods, as you do with $HTTP_POST_FILES.

$HTTP_POST_FILES contains the same information, but is not an autoglobal.

If the register_globals directive is set, then these variables will also be made available in the global scope of the script; i.e., separate from the $_FILES and $HTTP_POST_FILES arrays. For related information, see the security chapter titled Using Register Globals. These individual globals are not autoglobals.

Request variables: `$_REQUEST`

Note: Introduced in 4.1.0. There is no equivalent array in earlier versions.

An associative array consisting of the contents of $_GET, $_POST, and $_COOKIE.

Note: Prior to PHP 4.3.0, $_FILES information was also included into $_REQUEST.

This is a 'superglobal', or automatic global, variable. This simply means that it is available in all scopes throughout a script. You don't need to do a global $_REQUEST; to access it within functions or methods.

If the register_globals directive is set, then these variables will also be made available in the global scope of the script; i.e., separate from the $_REQUEST array. For related information, see the security chapter titled Using Register Globals. These individual globals are not autoglobals.

Session variables: `$_SESSION`

Note: Introduced in 4.1.0. In earlier versions, use $HTTP_SESSION_VARS.

An associative array containing session variables available to the current script. See the Session functions documentation for more information on how this is used.

This is a 'superglobal', or automatic global, variable. This simply means that it is available in all scopes throughout a script. You don't need to do a global $_SESSION; to access it within functions or methods, as you do with $HTTP_SESSION_VARS.

$HTTP_SESSION_VARS contains the same information, but is not an autoglobal.

If the register_globals directive is set, then these variables will also be made available in the global scope of the script; i.e., separate from the $_SESSION and $HTTP_SESSION_VARS arrays. For related information, see the security chapter titled Using Register Globals. These individual globals are not autoglobals.

Global variables: `$GLOBALS`

Note: $GLOBALS has been available since PHP 3.0.0.

An associative array containing references to all variables which are currently defined in the global scope of the script. The variable names are the keys of the array.

This is a 'superglobal', or automatic global, variable. This simply means that it is available in all scopes throughout a script. You don't need to do a global $GLOBALS; to access it within functions or methods.

The previous error message: `$php_errormsg`

$php_errormsg is a variable containing the text of the last error message generated by PHP. This variable will only be available within the scope in which the error occurred, and only if the track_errors configuration option is turned on (it defaults to off).

Predefined Variables

Server variables: $_SERVER

Environment variables: $_ENV

HTTP Cookies: $_COOKIE

HTTP GET variables: $_GET

HTTP POST variables: $_POST

HTTP File upload variables: $_FILES

Request variables: $_REQUEST

Session variables: $_SESSION

Global variables: $GLOBALS

The previous error message: $php_errormsg